Out of Oceanside, California
![Out of Oceanside, California](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgH8g80vaUtycvpPk3xt5SNM9HzlKq64jVe6F2szGW2W-nL7aoskybgHo2l7_pERYteWUOFNc40Xz7PxyEXDVpeYIyszIfIMyWuRw9d-zs_tALuHDdRBEJMN55G7wdT20-tuXLIZwGQOt4/s1600/November+2014+1.jpg)
Monday, December 10, 2012
December 8th out of Oceanside
Sailed with Jeff today. Great weather for December. Nice and warm. Not too much wind though. Out for 4 hours. Best speed was 5 knots. Travelled 9 Nmiles. There was a kayak race outside of the breakwater. Must have been 100 kayaks. Was cool to see them all race. We chased the wind and had a few nice tacks. An overall fun day on the water.
Made a video and posted to You Tube on the set up today.
Here is the link - http://www.youtube.com/watch?v=j34AL4pxge8
Saturday, December 8, 2012
Rudder Damage
I dragged the rudder while putting the boat on the trailer at the "Potters" event. I will need to fix it and am not sure how to go about fixing it. So, I posted on the Swallow boats forum, with no luck on a solution. I also sent an email to the owner of Swallow boats and he sent me a nice email with the solution to fix it. It's nice to have such a responsive builder that can help me. Glad I got the Swallow boat. ***********
Hi Matt,
I am hoping you can help me and offer some advice on fixing my rudder. I dragged it on the concrete at the boat ramp. It scrapped off the coating and a few millimeters of the body.
What is my best course of action to fix this? Will it harm the rudder coating etc if I sail it without fixing immediately? (The coating does not look like it will flake off).
I am attaching a couple of photos of the damage. Do you have a guard for the rudder I can purchase from you?
************************************************* Matt was kind enough to reply and offer a solution for me that is not to technically challenging! Here is his reply. **** Good to hear from you, but sorry to hear about the damage. It is easy to fill the gap in the gelcoat with a 2 part epoxy resin like araldite or similar. Not sure what you have in the US but a normal hardware store should sell something in 2 tubes that you squeeze out and mix together in equal parts. Put this on and things won’t get any worse. You can mix small quantities and build up the thickness, but if the glue is already thick and gloopy (most are) then you should be able to get it all on in one or two mixes. After that you can if you wish, sand it back flush and paint with a decent enamel or even 2 pack paint. But you don’t have to do this - just for looks really. I have toyed with the idea of making a stainless plate fabrication on the leading edges of the rudder and CB. This has given me added incentive. Always in the past I thought it would be relatively expensive and very little credit would be given at boat shows for example, when trying to sell the boats. Having it as an optional extra doesn’t seem right somehow, so we would be probably reducing our margins/or increasing the boat price to pay for it. Several people have done the same as you though so maybe I will give it some more thoughts. Best wishes,
I keep forgetting to post the repair to this that I did. I ended up using the epoxy to fix the damage as it was really a minor scrape. I could have used gel coat but really did not see the benefit apart from the cosmetic difference.
Here are a couple of photos of the repair.
************************************************* Matt was kind enough to reply and offer a solution for me that is not to technically challenging! Here is his reply. **** Good to hear from you, but sorry to hear about the damage. It is easy to fill the gap in the gelcoat with a 2 part epoxy resin like araldite or similar. Not sure what you have in the US but a normal hardware store should sell something in 2 tubes that you squeeze out and mix together in equal parts. Put this on and things won’t get any worse. You can mix small quantities and build up the thickness, but if the glue is already thick and gloopy (most are) then you should be able to get it all on in one or two mixes. After that you can if you wish, sand it back flush and paint with a decent enamel or even 2 pack paint. But you don’t have to do this - just for looks really. I have toyed with the idea of making a stainless plate fabrication on the leading edges of the rudder and CB. This has given me added incentive. Always in the past I thought it would be relatively expensive and very little credit would be given at boat shows for example, when trying to sell the boats. Having it as an optional extra doesn’t seem right somehow, so we would be probably reducing our margins/or increasing the boat price to pay for it. Several people have done the same as you though so maybe I will give it some more thoughts. Best wishes,
I keep forgetting to post the repair to this that I did. I ended up using the epoxy to fix the damage as it was really a minor scrape. I could have used gel coat but really did not see the benefit apart from the cosmetic difference.
Here are a couple of photos of the repair.
Subscribe to:
Posts (Atom)